Technical Script Handbook Updated: July 2026

GoPro Labs firmware expands standard GoPro cameras into programmable automation hubs. By scanning visual QR code scripts, creators and construction managers can configure automatic start/stop daily timers, voltage cutoffs, motion triggers, and custom Protune parameters without touching smartphone apps or camera buttons. This handbook details core script syntax and provides ready-to-use command blocks.

1. Core GoPro Labs Command Syntax Reference

Combine these modular operators to build custom camera scripts:

Command Operator Action / Function Example Syntax Behavior Result
!HHMME Execute / Wake at Time !0700E Wakes camera from zero-power sleep at 7:00 AM daily.
!HHMMS Sleep / Shutdown at Time !1700S Ends recording and powers down camera at 5:00 PM daily.
!nM Interval Capture Mode !5M Sets time-lapse photo interval to 5 seconds.
!vBvoltsS Low-Voltage Battery Shutdown !vB3.6S Safely shuts down camera if external USB drops below 3.6V.
!mMsensitivityS Motion Detection Trigger !mM50s!30S Triggers 30s capture when 50% screen motion is detected.
!C Clear All Active Commands !C Resets camera memory and removes all active scripts.

2. Pre-Compiled Automation Script Blocks

Copy and compile these production-tested script strings directly into your QR code generator:

Script 1: Commercial Construction Daily Work-Hours Schedule

Automates daily 7 AM capture start and 5 PM shutdown with 1-minute interval photos. Camera enters zero-power standby overnight.

!0700E!1700S!1M1r4K30
Formatted for daily 5-day or 7-day automated operation.

Script 2: Sunset to Night "Holy Grail" Fixed Protune Lock

Locks ISO Max to 400 and White Balance to 5500K for smooth day-to-night transitions, preventing exposure chatter.

!5M!oMISO=400!oMWB=5500!oMCOLOR=Flat

Script 3: Solar USB Low-Voltage Cutoff Protection

Prevents SD card file system corruption when operating on solar USB banks during extended overcast weather.

!vB3.6S!uN

3. Open Source GitHub Generator Repository

Access our official open-source script library and web-based QR code generator tool hosted on GitHub:

goprotimelapse / GoPro-Labs-TimeLapse-QR-Generator-Scripts

Open-source command library, automated QR generator, and technical documentation for GoPro Labs creators.

View GitHub Repository

Key Takeaways

  • GoPro Labs Purpose: Unlocks QR code automation, scheduled power cycles, and custom firmware controls.
  • Daily Schedule Script: !0700E!1700S!1M boots camera at 7 AM, takes 1-min intervals, and shuts down at 5 PM.
  • Clear Commands: Scan !C to reset non-volatile memory and restore default camera firmware settings.
  • Open Source Repo: Maintained at github.com/goprotimelapse for custom script generation.